What are the protective measures for thermal insulation materials?
Release time:2021-12-11Reading volume:Author:Chengdu DongLanxing Technology Development Co., Ltd.
In the case of house decoration, thermal insulation materials may be used. In addition to the key quality of such thermal insulation materials, how to store safe performance is also very important. It is necessary to do a good job in safety and fire protection. As the thermal insulation material itself is a commodity of inflammable and explosive articles, the storage on the spot shall be compound and standardized as much as possible, and the common problems of storage shall be grasped as much as possible.
1. Open fire is strictly prohibited
The topography and landform of building materials storage shall be strictly prohibited from open fire as far as possible. As long as there is building materials storage in the room or outdoors, it can not be close to the open fire. In addition, commodities such as inflammables and explosives can not be placed around. If there are other engineering construction works near the building materials, such as electric arc laser welding, sand wheel optical fiber line and optical fiber laser cutting, it is necessary to completely separate them from the building materials as far as possible at this time, otherwise it may cause flames in all the whole process of engineering construction.
2. Control the storage volume of thermal insulation materials
Some people have not mastered this aspect. They think that putting all the thermal insulation materials on the construction site will save time and effort. They can take them immediately, but that's not good. As a result, the site is congested and the total floor area is not used at all. Therefore, the total floor area of daily life will become smaller and the project progress will be reduced. Secondly, it is also very risky to place it like that. Therefore, there are provisions for the storage amount of raw materials, and the total amount of raw materials cannot exceed three days. That would be safer.
3. Pressure is strictly prohibited
Thermal insulation materials are generally relatively smart raw materials. If they are pressed, they are easy to be broken. Therefore, after the same thermal insulation materials are placed on the spot, it is necessary to avoid placing and hoisting on them, except for independent placing and hoisting. The self thermal insulation material cannot be deposited too high, otherwise the absolute height will increase and the total weight will also increase. If it is skewed, it is easy to fall to the ground.
4. Ensure indoor ventilation
If the thermal insulation materials are put into the room, the geographical environment in the room must ensure the circulation of goods and open the windows and doors. In that way, some bad vapors in the room can be discharged. In addition, maintaining air circulation can also avoid the deposition of soot and small soluble total solids. This kind of soot is also very unsafe when encountering fire. Building materials can not be placed in the lower vent of outdoor fire. Even in that case, they must be surrounded by flame-retardant materials. Naturally, it is more important to avoid fire. It is not necessary to carry out project construction in windy temperature. Guarantee mechanism shall be done as much as possible in the whole process of project construction.
5. The quality of thermal insulation materials meets the standard
Thermal insulation materials can make full use of good house decoration effect, but the quality can not be ignored. If you want to buy from a reliable home decoration building materials industry, businesses will generally get common problems. Generally speaking, the placement and application of building materials must be in accordance with the specifications, and they do not have to be placed casually. In fact, they should learn and train before decoration. Or find a decoration company with technical qualification. Their control in the field of safety protection will be more and more strict, and natural residents themselves also need to have regulatory effect.