Chengdu high performance concrete manufacturer: explain the installation method of GRG materials in detail with you-Chengdu DongLanxing Technology Development Co., Ltd.

Chengdu high performance concrete manufacturer: explain the installation method of GRG materials in detail with you

Release time：2022-06-15 Reading volume： Author：Chengdu DongLanxing Technology Development Co., Ltd.

Come and have a look! Chengdu high performance concrete manufacturer: explain the installation method of GRG materials in detail with you

GRG material products are all formed and manufactured in blocks in the factory, and steel L-shaped corner codes are embedded and installed behind each GRG decorative plate. At the construction site, the keel transfer layer shall be installed at the GRG installation position in advance, and the adapter shall be welded at the installation point. When the GRG decorative plate prefabricated by the manufacturer is transported to the site, the installation can be completed through bolt connection. During installation, experienced workers are required to properly adjust the connection positions of adapters and bolts, so as to achieve consistent gap and smooth transition between plates. For the overall seamless GRG surface effect, it is necessary to conduct joint treatment on site, fill the gap with high-strength mold gypsum powder and special additives, and then polish to complete the overall combination of the decorative board. The surface treatment materials are mostly coatings, and there are also painting or skin coating processes. According to different requirements of surface course and process, it can be completed in factory or on site.

GRG material, as a new building decoration material in China, has many advantages. So what are its shortcomings and what should be paid special attention to in the implementation? First of all, the cost of GRG is relatively high. According to the needs of modeling, the choice of mold and process is different. The cost per square meter ranges from hundreds to twothousand. Therefore, it is necessary to control the consumption and cost in the design. The use of GRG should be as few as possible, and its "changeable character" should be displayed in important parts. In addition, it can also be used skillfully. Since GRG and ordinary gypsum board are gypsum products, they can be seamlessly connected through treatment, so that the use area of GRG can be appropriately reduced in the straight and patterned positions.

Secondly, GRG material installation requirements are relatively high. Some construction periods are very tight, which puts forward high organizational planning requirements for GRG deepening design, processing and production, installation and acceptance. Since the processing cycle of GRG is about 1-2 months, if major problems arise during processing and installation, returning to the factory for secondary processing will have a great impact on the construction progress. The installation of finished products also has high technical requirements for workers, including the inner layer treatment, which is constructed by professional manufacturers and provided with quality assurance.

Thirdly, GRG surface course has high process requirements. Although it is mold processing, there will still be unsmooth surfaces, especially curved surfaces, that are not easily detected by the eyes due to on-site joints and local repair and grinding. Therefore, we must be careful with the high gloss paint, because the high gloss paint reflects significantly, and very small defects will also be amplified.

To sum up, I believe that the partners have roughly understood the installation methods of GRG materials in Chengdu high performance concrete shared by Xiaobian. If you want to know more, please contact us by telephone.

Article label：

Last：You know what? The use of Chengdu grouting material is conditional
Next：nodata

About us

Product Center

Your choice is our motivation，
Choose us, we work with you to create the future。

Chengdu refractory silica fume

Chengdu grade 96 silica fume

Chengdu grade 92 silica fume

RPC subway evacuation platform

Laminated plate

RPC cover plate

nanometer material

Sleeve grouting material

Basalt fiber

Chengdu high performance concrete manufacturer: explain the installation method of GRG materials in detail with you

Your choice is our motivation， Choose us, we work with you to create the future。

Chengdu high performance concrete manufacturer: explain the installation method of GRG materials in detail with you

Your choice is our motivation，
Choose us, we work with you to create the future。